Foam Wax Applicator
What is it for?
Globalwipe's Foam Wax Applicator is born for hand waxing. No matter used by detailing guru or amateur, the Applicator stays professional working well with any wax and sealant.
Why is it special?
Globalwipe adopts EU imported raw material to form them into close-cell Foam Wax Applicators that features good resilience, tenacity, and density.
Close-cell foam gentle, slowly absorb and spread wax, sealant, glaze...onto paint surface evenly for its tiny cell characteristics. Coating chemicals can be saved at the same time.
Soft surface and smooth edge of the Applicator stay no risk of abrasiveness or scratch for paint.
If you own a logo, we suggest to imprint onto the Applicator, not only for advertising, but also further saving chemicals because close part of imprint area.
Maintenance
Soak Foam Wax Applicator in dissolved cleaner for 10-15 minute, then agitate and squeeze it gently, rinse with clean water and let air dry.
Specification
10.5cmx2cm
Foam Wax Applicator
What is it for?
Stick to surface of microfiber applicator with its interface hooks gently, easy and free to hold applying wax or compounds evenly with minimum effort.
Why is it special?
When you use disc microfiber appliactor without pocket, it is not easy to hold it and press power from fingers can't be balance delivered. While if you use the one with pocket, the shortage is only small working space left on the pocket side. So aiming to avoid above awkwardnesses, Globalwipe takes proud to introduce the Microfiber Applicator Handle that enable to maximize working capability of your disc microfiber appliactor without pocket.
Short and blunt hooks on handle's interface don't hurt microfiber fabric surface. Reusable and durable. ABS industrial standard plastic enable chemical resistance.
How to use?
Press the handle onto microfiber applicator surface to apply. Pull up gently after application or switch to use another side.
Microfiber Wax Applicator
What is it for?
Apply any wax, cleaner polish, sealant, glazes or dressings in cream, paste or spray onto surface of car, truck, motorbike.
Why is it special?
Globalwipe is manufacturer and knows well the difference of good and bad quality microfiber, for this applicator, we select the best microfiber fabric- Industrial standard short nap microfiber that carries just proper amount of sealant or wax to make the longest wipe on surface of paint, plastic, metal or leather.
See no edge because of double-stitching process removes risk of scratch.
Resilient and durable foam inside delivers right proper pressure to spread a thin coat on any surface.
The foam doesn't saturate to waste dressings that is only kept on microfiber surface.
How to use?
Apply few drops or thin lines of sealant or wax onto applicator's surface, then apply to the target surface of your vehicle by moving back and forth or clockwise until the dressings is spread uniformly.
Apply to target surface directly when use spray dressing, then wipe applicator in the spray area.
Maintenance
The wax applicator is washable for re-use. But if you find the surface becomes hard after applied crystallographic dressings like ceramic coating, just throw the applicator away without hesitation because that will scratch paint surface with no doubt.
